Leveling Your Print Bed

2021-04-06T13:15:54-04:00Tags: |

Here is a video showing my process for leveling my print bed on the Ender 3v2.

Here are the general steps (in the video I forgot to show preheat PLA until part way in):

  1. Turn on the printer
  2. Preheat PLA
  3. Auto Home
  4. Disable Steppers
  5. Adjust front left corner height using the wheel under the bed so that a piece of paper can slide with some friction between the bed and the print nozzle.
  6. Repeat bed height adjustment for back right corner
  7. Repeat bed height adjustment for front right corner
  8. Repeat bed height adjustment for back left corner
  9. Repeat steps 5-8 until all four corners are at the proper height simultaneously.

The MPACT project is supported by the Office of Elementary and Secondary Education (OESE), U.S. Department of Education, through Grant U411C180070 to SRI International. The federal grant provides $3,926,461, or 90% of the total project funds. Ten percent of project funds are provided by additional generous donors. The opinions expressed are those of the authors and do not necessarily represent the official views of, nor an endorsement, by OESE, the U.S. Department of Education, or our other donors.

Logo of TERC

Go to Top